|
The MGS2824 Gigabit Ethernet Switch is a Telco-Grade Gigabit Ethernet Switch suitable for IP based access network’s concentrating equipment or solution for such construction as ETTH (Ethernet-to-the-home) and campus/internal building networking.
The MGS2824 Gigabit Ethernet Switch provides 24 of 10/100/1000Base-T port for downlink and 2 slots for uplink – each slot accommodates such uplink module as 2 ports of 10/100/1000Base-Tx and 1000Base-X (SFP).
The MGS2824 Gigabit Ethernet Switch supports not only high performance Layer 2 switching function, but also such additional Layer 2 functions as STP (Spanning Tree Protocol), Link aggregation, Port based VLAN, 802.1Q and stacking. The switch also has IGMP snooping and IGMP proxy functions which make it possible for effective multimedia multicast data transmission.
The MGS2824Gigabit Ethernet Switch provides powerful packet filtering (Layer 1 ~ Layer 4) and QoS functions for service security and quality improvement. Using such packet filtering function, blocking harmful internet site and unauthorized data transmission can be achieved. Also the switch has such functions as NetBEUI/NetBIOS filtering, DHCP filtering, MAC restriction per port and system and network protection from traffic attack is supported.
Features
High Performance Switching
-
34Gbp high performance switching fabric for high Speed data transmission without traffic congestion in every single port
-
16K MAC address table so as to high capacity packet
-
Switching
-
Chip level Store-and Forward structure
-
Powerful QoS with up to 8 priority queues and Layer 1~4 filtering functions.
-
IGMP snooping v2/v3, IGMP querier and IGMP proxy functions for multicasting network
-
Ingress and egress rate limit per port by 1Mbps
-
4,095 VLANs Excellent operating management Features
-
Easy management -SNMPv1/v2, Syslog, Telnet, Console
-
Remote software upgrade via TFTP and FTP
-
LEDs for Power, CPU Run, Fan alarm, Uplink Threshold,
-
Link/Act per port
-
Built-in Thermometer
-
Low noise design
Auto MDI/MDIX
-
Auto detection of cable type (straight or Cross) and auto adaptation of port configuration
-
Various Interface
-
Downlink Interface
-
2 slots for Optional Uplink Interface Module
-
2 x 1000Base-X(SFP)
-
2 x 10/100/1000Base-Tx
19” standard Rack mountable
Specifications
-
802.1Q VLAN
-
Double Tag VLAN (QinQ support)
-
802.3ad LACP, Static trunking
-
16K MAC Entries
-
Link aggregation (13 groups, 8 ports per group)
-
Spanning Tree Protocol per VLAN
-
PVST
-
802.1w RSTP
-
Stacking up to 8 systems
-
Loop-back detection and blocking
-
DHCP Relay (Option 82) and snooping
-
Packet Dump
-
IGMP Snooping, Querier, Proxy, Statistics, MVR
-
Auto MDI/MDX
-
Virtual Cable test
Security
-
Layer 1~4 Packet filtering (ACL)
-
NetBEUI/BIOS/NBT Packet Filtering
-
Private DHCP server blocking
-
MAC address limit per port
-
Ingress & egress speed limit per port by the unit of 1Mbps
-
Broadcast/Multicast/DLF packet limit function
-
TCP sync attack & TCP port scan attack blocking
-
Abnormal source MAC blocking
-
ARP inspection and ARP spoofing protection
-
CPU inflow packet control
-
Port flood guard to block abnormal traffic inflow
-
Subscriber loop detection and blocking
-
SSHv2
-
RADIUS authentication
Congestion Management
-
HOL Blocking
-
Back pressure
-
802.3x
QoS
-
802.1 p Traffic control
-
8 priority queues per port
-
DSCP Marking/Remarking
-
CoS marking/Remarking
-
SPQ, WRR, WFQ
Operation
-
Power: 110/220VAC +/- 20%, 50/60Hz
-
Power Consumption: Max. 60W
-
Operation Temperature: 5° C ~45° C
-
Operation Humidity: 0~80% non-condensing
-
Noise: Max. 35dBA
Dimension: 432 x 225 x 44.5 mm (W x D x H)
Standards Compliance
-
IEEE 802.3 10BASE-T
-
IEEE 802.3u 100BASE-TX
-
IEEE 802.3ab 1000BASE-T
-
IEEE 802.3z 1000BASE-X
-
IEEE 802.3x Flow Control
-
IEEE 802.1D Bridging
-
IEEE 802.1d Spanning Tree
-
IEEE 802.1p/Q
-
RFC 768 UDP
-
RFC 783 TFTP
-
RFC 791 IP
-
RFC 793 TCP
-
RFC 792 ICMP
-
RFC 826 ARP
-
RFC 854 TELNET
-
RFC 1213 SNMP MIB II
-
RFC 1493 BRIDGE-MIB
-
RFC 2233 IF-MIB
-
RFC 2571-2575 SNMP
-
RFC 2665 Ether Like-MIB
-
RFC 1907 SNMPv2-MIB
|
|